M400 Commissioning

First connect your network/DSL and check your router connection. Then start by connecting the terminal to the multiport cable plug. Connect the multiport cable to the router and then connect the power supply unit to the power supply.

Press the lever of the pen holder on the underside of the terminal downwards to release it from the terminal.

Turn the inside of the pen holder towards you and push the end of the pen cable in from top to bottom.

The pen can now be clicked into the pen holder. Slide the pen holder into the bottom of the appointment and secure it.

Your terminal will be handed over to you already configured by PAYONE. For the data transfer from your LAN to the Internet, to our authorization computer, normally no login is necessary. If special settings (e.g. fixed IP addresses) are required, please contact our customer service, who will make the settings in cooperation with the network administrator (cashier).

The cash register operator can set up a cash register connection with the determined IP address and I/O port number of the terminal and register the terminal. The entries at the cash register are specific to the cash register. After logging in, the terminal switches to cash register mode. The Information and Main menu fields are no longer displayed.

The device does not have an on/off switch.

Switching on

1. Connect the device to the power supply. The software is loaded. The basic status "Please log in" is displayed.

2. Log the device onto the POS system. The basic status "Terminal ready for operation" is displayed.

Switching off/restarting via softkey (touchscreen key)

1. Log the device off the POS system.

2. In the initial state, select the Information menu, enter the password (00 00 00) and confirm with the confirmation key [ ]
   Confirm with the confirmation key [O].

3. Select the Switch off function.

4. Select the corresponding function: Switch off and confirm with the confirmation button [O] to confirm/restart and press the confirmation button [O] confirmation button.

The device sets up the LAN connection automatically.

After switching on the device, the display appears in the basic state. Depending on whether the device is logged into the POS system, the display and navigation to the other menu screens will differ.

If not in use, the device switches to the display saver after a set time has elapsed - if activated.

• Status bar: Displays the date, time and information on the status of the LAN connection and contactless payment.

• Payment area: For performing the standard payment process. If the device is logged in to the POS system: "Terminal ready" is displayed. If the device is not logged in to the POS system: "Please log in" is displayed.

• Soft LEDsindicates the status of the contactless payment.

• If the device is not logged on to the POS system: Softkeys for the menu Information menu and to the Main menu are displayed.

From the display in the basic state, you reach the main menu. In the main menu, you can make settings on the device, enter system data, configure payment processes and call up information. Functions for diagnostics and service are also available.

If the device is logged on to the POS system:

If the device is not logged into the POS system:

The Information menu is only available if the device is not logged on to the POS system. In the Information menu, you can call up frequently used information and switch off or restart the device.